pusher build

[ericthetree]

thought I'd try my hand at building a pusher jet.plane is made using 1/2" pink foam insulation,airframe cost 1.50 covering cost 2.50. Wingspan 24" LOA26" I am using a bp21/880mah 3-cell lipo to power it.

[Pyrock]

So how does it fly??

[ericthetree]

fast and manueverable-fun

[Pyrock]

It looks a lot like my Aerocat only smaller. Here's my homemade foamy F22. It's got a 21" wingspan and rips through the air pretty nicely. The beauty is that if/when I crash, I just transfer my setup onto another fuse.

[ericthetree]

here's my latest design, still have a way to go before finished product.

[ericthetree]

almost ready for maiden

[kc135boomer]

almost ready for maiden

Thats cool!:)

[ericthetree]

this one is soon to be in the wind!

[flypaper 2]

What's your power system, Eric.?

[ericthetree]

3700kv bl direct with 2200mah lipo, cut down 5x5 prop. it will have aileron and elevator control surfaces. the pink crossmember at rear will be elevator