PDA

View Full Version : EM Twister 60 +Jeti 77 opto esc


johnandles
09-27-2005, 12:26 PM
Just a quick question for those who use EM twister motors .
EMs' web site shows info for 5 degree (soft) timing.
and the constants for 30 degree timing (hard).
I see that AXI motor requires hard timing (as per my Jeti instuctions) .
Is this required also for EM twister 60 outrunner (was known as 29).?
I realise the higher timing comes at some cost,(higher amp draw ETC) .
any feedback would be apreciated.
Also MotoCalc 7 results are not quite the same as per manufacturers results...maybe static results,or just too many variables to contend with?
(food for thought).:cool:


Thanks again in advance (sorry about a quick long question..):D
johnno

ron_van_sommeren
09-27-2005, 06:12 PM
Motocalc is not (yet?) really suited for outrunners.

johnandles
09-28-2005, 10:52 AM
Thank you Ron for your reply,I was hoping someone with EM Twister experience would pass on some feedback on timing,setup ETC.
Thanks again:D
johnno

ron_van_sommeren
09-28-2005, 02:46 PM
There have been several 'twister' threads over at www.rcgroups.com