PDA

View Full Version : Flip goes Kora


Joacim
09-27-2005, 05:38 PM
Little movi showing that the new Kontronk Kora motors not only looks good, they work good to ;)

http://www.pjs-modellhobby.com/bilder/flip%20kora25.wmv

this setup is 5s and only 40amp, for more power 6s is no problem with same prop.

Mike Parsons
09-27-2005, 06:02 PM
Very nice Joacim! Good flying as well!

Joacim
09-27-2005, 10:44 PM
Tanks Mike!

Joacim
10-02-2005, 10:26 PM
Tryed it with 6s Lipo 16x8" prop, 940watts and awsome power, going out of hover like a rocket ;) motor runns still cool.

JPHen
10-09-2005, 12:23 PM
I'd love to see where I can get one of these motors. I can't seem to find them anywhere.


Joe

Joacim
10-09-2005, 04:14 PM
http://www.kontronikusa.com/

http://www.kontronik.de/Mibo/K25250k.jpg

JPHen
10-09-2005, 04:18 PM
I'd like to buy in the US but no one in the carries the motor. I'm trying to find a motor for a 60 conversion and would be willing to import. Joacim, does your company ship to US?


Joe

Joacim
10-09-2005, 04:24 PM
Been flying alot on this 6s setup with 16x8" prop, very nice and powerfull performance, the best thing is i can fly 20+min with lotts of hover and TQ rolling withaout worying abaout motor getting hot! runns effishent at this high vont-low current, and has very good selfcooling design. I will try to find a bigger plane for this motor so i can puch it some more ;)
http://www.pjs-modellhobby.com/bilder/Kora%2015%20klocka.jpghttp://www.pjs-modellhobby.com/bilder/Kora%2015stator.jpg
http://www.pjs-modellhobby.com/bilder/Kora15%20magnets.jpg
Comparing to simular motors in this sice i have tryed the Axis wont stand a chance, or Twister and more, Actro CL can handle the same power and runns smoth and effishent but they are not avalibul in this liw KV versions, then there is Pletti Orbit, very simular but i find the Kora little better/exlusive designed, Orbits are "only" avalibul down to 520kv but Kora 25 down to 353kv and can be loaded up to 10s Lipos.

Best controllers Jeti advance, Kontronik JAZZ.

Joacim
10-09-2005, 04:27 PM
Joe! mail me and lets see what we can do.

jockegoransson@telia.com

JPHen
10-09-2005, 07:58 PM
Thanks. Sent e-mail.


Joe