PDA

View Full Version : Nitro Models Yak54 3D


Big Oakden
02-05-2007, 07:24 PM
I have finally completed a new version of this plane after my last one was obliterated by someone turning on their xmitter when I broke ground.

Powered with Storm 50-52-16 by Vision Hobbies
90 Amp ESC
4s and 3s 3700mah Poly RC Lipo
Used Pull/Pull Rudder system with CS-64 servos on the Elevator and Rudder (by Hobbico) and Hitec 425BB on ailerons.

Amazing part of this plane is the power:
I am only pulling 50 AMPS, and producing over 1400 watts of raw power.
And this is on a 13/8 3 Blade Master Airscrew NITRO Prop.

After a badly needed rebalance, we flew her again this saturday.

Takeoff was at 1/2 throttle, and was a rocketship at that setting. She flys well at 3/8's throttle. SHe climnbs well at 1/2 and has unlimited vertical at 3/4 throttle.

Thanks to Rich & Todd at Vision Hobbies for their help in powering this beast!!

if you want to see the video, you can do so at visionhobbies.com on the 2nd page of videos.

Dave