PDA

View Full Version : MX400 pinion gear.


Super Dave
02-12-2007, 01:44 AM
I have the Helimax MX400 and I need a 9 or 10t pinion gear. I'm using the Align 430L Brushless and the head speed is way to high even after dropping it to 12t pinion. The problem is I can't find a 9 or 10t pinion anywhere that will fit the 3mm shaft on this motor. So does anyone know where I can find a pinion gear of this size?

PilotDane
02-12-2007, 02:34 AM
11 tooth is the smallest pinion I have seen. It is hard to imagine them any smaller.

Super Dave
02-12-2007, 10:56 PM
Align does make a 9t pinion gear but it only has a 2.5mm shaft which wont fit on mine. I'm thinking about buying that and drilling it out.

NoFly
02-20-2007, 06:58 PM
Is that the 3.17 mm shaft check out www.justgofly.com they have them...

Super Dave
02-22-2007, 02:41 AM
Great thank you. I'll have to check that out.

darkside212
02-23-2007, 12:07 AM
Or you could buy one from me :D

I have a couple 10T 3.17mm .5 mod pinions... $2.50 plus $1 for shipping :D


they have set (grub) screws ;)