E Heli settings

[rmbler]

Hi all i need help does anyone know wht the factory settings are on the e-flight blade 50% ect.
as well as anyone that can help me with the settings do do just normal flight hover foward flight nothing fancy no nearly ready for 3d.
thank you

Phil

ps. i posted this on rcu but allways seem to get a wide helpful answer between both fourms......here mostly tho ..........thank you

Regards

[Ron]

on the tail rotor mix and gyro adjustment, pages 14 and 15 of the manual cover it in depth...Only thing that is a little unclear is that you make adjustment to the tail rotor mix with the battery hooked up...then before you spin it up you have to disconnect the battery for about 5 to 10 seconds...hook it up again and you are off....if you don't unhook the battery, the change won't take effect....gyro changes are effective immediately when you make them, and must be done with the battery plugged in...I used a plastic screw driver for the adjustments....This is not a difficult process, it just is kinda trial and error.....It is easy though and just takes some patience...I had never flown a helicopter when I bought the Blade, and it was no trouble....it now will hover almost hands off..