Custom build service for BL motors

[olmod]

For those that dont want to build their own motors ,i offer a custom build service with after sales service here in Australia,
here is an example ,a 22 gram 20mm gb stator based spindle mount with rear cicuit board strain plate to solder esc wires too.
each motor has its own test sheet supplied.
GB 20mm stator
12 5x5x1n50 xxtx.xmmxY
No load 25000rpm @11v @1.2amps
GWShd 7035 10000rpm 7.2v @4amps=207g=7.3oz
APCe7x5 7900~8000rpm 7.2v @7.25amps=290+g=10+oz.
3SP 11v
GWShd7035 13200rpm@10.6v@7.5amps=394.85g=13.94oz.
No load 25000rpm @11v @1.2amps
gws hd 7035 13000rpm 10v @10amps =13oz thrust.
gws hd 6030 16500 rpm 10.5v @8.5amps = 14.91oz.

Other size motors are available please PM me for any further information. Cheers Lez.

[JFGrn]

My God!

The mad scientist Eric Tolladay!!:eek:

[olmod]

Yep i liked the pix so much i asked his permission to use it when i first saw it,it sort of captures the feeling of every first time motor builder, when they crank their baby up:D dont you think.:)