yntdesign
08-04-2005, 02:59 AM
YNT uDesign is proud to announce the availability of
-The PowerCube -
A Complete, High-end, Advanced, Battery Analysis System
To view the PowerCube, learn more about it, and it's analysis software in-depth...Browse to www.yntdesign.com (http://www.yntdesign.com) , We're still updating the website, but for now here's the "basics"...
Basic characteristics
Chemistrys Supported: NiCd/NiMH 1 ... 30 cells, Pb, Li-xx (any Lithium based cells)
Power supply Pb 12V DC, min. 40Ah, (car or tractor)
Power supply voltage 11-15 VDC
Min. power supply voltage (load) 10.8VDC
Min. power supply voltage (no load) 10.5VDC
Protection output - short circuit, reverse polarity, overheating
Charging
Output voltage 1-49VDC
Output current <0.1A-10A (Yes, a FULL 10A!)
Max. charge power cca 300W @ power supply voltage 12V
Automatic mode for NiMH, NiCd cells
Manual mode for NiMH, NiCd, Pb, Li-xx (any Lithium based cells)
Discharging
When discharging is in progress, energy is transfered to the source battery. An external discharging resistor will be available as option.
Voltage of discharged battery 1-49VDC
Discharge current 0.3-10A depending on type/capacity of source battery
Max. discharge power cca 150W
Automatic mode for NiMH, NiCd cells
Manual mode for NiMH, NiCd, Pb, Li-xx cells (any Lithium based cells)
Cycle Mode
Number of cycles discharge/charge 1-9 (user programmable)
Delay time between charge/discharge or discharge/charge cycles 1-60 mins
PC-Interface/Data Format
Charging 1:ttttt:uuuuu:iiii:0AH 0DH
Discharging 1:ttttt:uuuuu:iiii- 0AH 0DH
Data output for PC serial line RS232, speed 9600Bd,1Start Bit, 8 Data Bits, 1 Stop Bit, No Parity (software is included)
Others
Number of user-defined settings 9
Display LCD 2 x 16 characters, backlight viewing area 95 x 20mm
Weight aprox. 1300g
Dimensions 130x160x70mm
Operational environment temperature -5 ... +50°C
Contact: sheldon@yntdesign.com (sheldon@yntdesign.com) - A Soaring Nationals Supporter
YNT uDesign is the North American Distributor for the PowerCube
-The PowerCube -
A Complete, High-end, Advanced, Battery Analysis System
To view the PowerCube, learn more about it, and it's analysis software in-depth...Browse to www.yntdesign.com (http://www.yntdesign.com) , We're still updating the website, but for now here's the "basics"...
Basic characteristics
Chemistrys Supported: NiCd/NiMH 1 ... 30 cells, Pb, Li-xx (any Lithium based cells)
Power supply Pb 12V DC, min. 40Ah, (car or tractor)
Power supply voltage 11-15 VDC
Min. power supply voltage (load) 10.8VDC
Min. power supply voltage (no load) 10.5VDC
Protection output - short circuit, reverse polarity, overheating
Charging
Output voltage 1-49VDC
Output current <0.1A-10A (Yes, a FULL 10A!)
Max. charge power cca 300W @ power supply voltage 12V
Automatic mode for NiMH, NiCd cells
Manual mode for NiMH, NiCd, Pb, Li-xx (any Lithium based cells)
Discharging
When discharging is in progress, energy is transfered to the source battery. An external discharging resistor will be available as option.
Voltage of discharged battery 1-49VDC
Discharge current 0.3-10A depending on type/capacity of source battery
Max. discharge power cca 150W
Automatic mode for NiMH, NiCd cells
Manual mode for NiMH, NiCd, Pb, Li-xx cells (any Lithium based cells)
Cycle Mode
Number of cycles discharge/charge 1-9 (user programmable)
Delay time between charge/discharge or discharge/charge cycles 1-60 mins
PC-Interface/Data Format
Charging 1:ttttt:uuuuu:iiii:0AH 0DH
Discharging 1:ttttt:uuuuu:iiii- 0AH 0DH
Data output for PC serial line RS232, speed 9600Bd,1Start Bit, 8 Data Bits, 1 Stop Bit, No Parity (software is included)
Others
Number of user-defined settings 9
Display LCD 2 x 16 characters, backlight viewing area 95 x 20mm
Weight aprox. 1300g
Dimensions 130x160x70mm
Operational environment temperature -5 ... +50°C
Contact: sheldon@yntdesign.com (sheldon@yntdesign.com) - A Soaring Nationals Supporter
YNT uDesign is the North American Distributor for the PowerCube