PDA

View Full Version : Need Help With Setup


nrichardz
08-05-2005, 04:01 PM
I have a GWS P51 and made the jump recently to brushless and lipoly and just want to know if this is a good starting point because I am going to fly it this weekend with all the changes I have a phoenix 10 speed control a himaxx 2015-4166 motor beared at 6:6.1 with an 11/3.8 prop battery is a 3 cell 1320 lipo thank you for the help I bought the best stuff I could with the money I had and dont want any problems if I can help it thanks for the help

nrichardz

Reformed Nitroaddict
08-05-2005, 04:06 PM
That is a great motor - but you will want to prop it up a bit. Here would be two setups that would maximize the motor combo you have without going over the 10A limit of your ESC:

6:1 gearing and a 10x7APC prop
5:1 gearing and a 9x6APC prop

You could go with a 10x4.7 on 6:1 but it would slow it down quite a bit. That plane needs alot of airspeed.

Rugar
08-05-2005, 04:18 PM
Yep, I agree. Put on a 10x7 APC SF for the setup you have. It should put you around 8 1/2 amps @ WOT, give or take a little depending on your altitude.