PDA

View Full Version : got a new power system!


stroland
11-23-2005, 01:28 AM
Went to a swap meet last saterday and got the following parts,a 30 amp brushless esc by tower pro,a Bruhless motor,the only thing on the motor is the letters Bm2410-09. And a 3s 1800 8c continuos-18 c burst lipo by eletric power( thats what it says on the pack) I know what the 8 to 18 c meens. the motor, well the bell(its a out runer) looks like it was stamped and I dont think it will handel 30 amps but I over bought the esc on purpuse ill run it (the esc)later in a 2 meter glider. for now I just plan on putting it on my slow stick, or mayby on a beat up old G.P. yak 55. what I want to know has any one herd of any of these componets and are they any good? the esc was only 35$ the motor 22$ the lipo 35$,Thanks.

batman
11-23-2005, 03:15 AM
Do a search on this roum for the motor and you will get some hits. I don't know anything about the ESC but did see something about the LVC being too low, I think. Anyway its something to keep your eye on. I have heard that the Electric Power batts are a good honest battery. Nothing fancy just works as advertised.

TManiaci
11-23-2005, 04:11 AM
stroland,

That Bm2410-09 is also a Tower Pro toy, see it HERE (http://www.tedani.com/tower-pro-bm241009-1100kv-outrunner-brushless-motor-w-15a-esc-p-561.html?osCsid=af8b8cf8c3275bffcf7be0896ed1ff44). It's a 12 amp 1100Kv motor. That battery and ESC are bigger than the motor capacity. Prop for 9x3.8, should be okay. Don't know about quality. Should work well on the Yak.

stroland
11-24-2005, 02:59 AM
Ok thanks. I kinda thought that I hadnt got a big enoughf motor but I didnt know by how much.