PDA

View Full Version : 40 - 60 Size Scale Aerobats for IMAC


Glenn Carter
11-29-2005, 09:33 PM
I sure would like to see some good 60" Scale Aerobatic ARF's or light conversions of existing planes for IMAC competitions. Its gotta be the wave of the future. :)

rcers
11-29-2005, 09:54 PM
Here are a couple - if you go a tad larger there is a much larger selection:

Extra:
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXJ580&P=ML
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXDJB8&P=7
Cap:
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXHEH1&P=ML
http://www.yellowaircraft.com/aerobatic/aerobatic.htm

If you can go larger check these out:
http://www.davepatrickmodels.com/frame.htm

Mike

tahustvedt
11-30-2005, 10:55 AM
Here's my "The World Models Velox Rev II". A 60-size scale aerobat. I have only flown it for three minutes because it's so dark and cold here now but it felt great! Much better than my 60-size Seagull Edge 540. I'm using a 20" prop right now. It included a pilot and had a cockpit floor but I didn't like the pilot.

RTF mine weighs 3600 g which is spot on the recommended weight.

I used:
AXI 4130/24 (rewound 4130/20)
ACP 20x11 prop (will try 20x13 next)
8S PolyQuest XP 2500 mAh
Hacker Master Opto 77
5V UBEC
4x GWS 2MGBB servos
Futaba 8 ch PCM Rx.