PDA

View Full Version : Will Trex 450 tail fit Esky Belt CP ?


birdDog
01-11-2008, 03:35 AM
Just tuning up a new Belt Cp and am not overly thrilled with the tail design. Things seem to measure up the same but does anyone have experience fitting a trex 450 tail assembly to the Belt cp?

300Maniac
06-30-2008, 02:02 AM
They both have 12mm OD tail boom and use MXL pitch belts. The Trex has a 4mm locating hole centred 10mm up the left hand side of the boom. The cheap way is to use Trex plastic parts and drill the hole. I like the Microheli Alloy tail boxes but they are $40, $50 and $95, they don't need a locating hole and the tooth belt pulleys are better than Trex ones.