PDA

View Full Version : Berg 7P jumpers ?????


drsmooth
01-24-2009, 12:20 AM
Just got a used Berg 7P, but didn't get the program jumpers. Can anyone tell me if these can be made up with servo plugs? Does it have 2 wires or 3?:confused:
Also have a question about using the castle link. When you hook the 7P to the link, do you have a battery connected to power the receiver, or just power it with the link. The instructions, as I read them, didn't make a whole lot of sense to me.????

Larry3215
01-24-2009, 05:51 AM
Yup you can use a servo lead and short the two wires yourself.

Pull the center wire and short the two outer ones together and you've got it.

Larry3215
01-24-2009, 05:53 AM
Forgot your other question on powering the rx.

Id try it without an external battery and see what happens. Thats the easiest solution.

Its been so long sinse I tried the programming Ive forgotten how it goes :)

drsmooth
01-24-2009, 12:15 PM
Thanks Larry3215 for the help. I'll try that today. This receiver was in a heli & I'm flying an electric sailplane. Mainly just want to make sure the failsafe mode is off. Not real sure I like the idea of my plane flying its self.;-)

drsmooth
01-25-2009, 11:20 PM
duh.......:red: Plugged my Castle Link into my Berg 7P & the info I was seeking was there on the screen. You DO plug a battery pack into the receiver when connected to the link! DUH!!!:silly: