PSD, AI, JPG files of WattFlyer logo for decals, shirts, etc

[admin]

Pick up WattFlyer logo in jpg and illustrator formats here. (Updated 5/5/07 with new logo version files in psd and ai formats)

http://www.wattflyer.com/logos/

the zip file is the same as the .ai (illustrator) file just zipped up.

The jpg is a higher res 300 dpi version. If anyone needs custom file types or sizes and cannot work with these files just PM me.

You have express permission to use these as you like to create prints, decals, t-shirts, etc

I am having our vinyl cutter (Ken Isaac aka RCKen) create from these files vinyl decals in all sizes and color combos. If you are interested you can PM or email him here on Wattflyer and anyone can buy direct. His work is always perfect. I have instructed him to keep his normal profit for his time and material and for WattFlyer's percentage he can donate that to charity (The Humane Society (http://www.hsus.org)and ASPCA (http://www.aspca.org)). Link below to RC GraphicsZone:

http://www.rcgraphicszone.com/wattflyer/

WattFlyer Swag can be purchased through our partner, Georgia Stitching.

http://georgiastitching.com/wattflyer/

Thanks so much to everyone here for your support and participation.

[wattman]

A big THANK YOU Marc :D

[firewalker135]

Thank you Marc........

[Doppelganger]

Thanks again Marc.

[GeneL]

Thanks Marc !

[RC-Xplanes]

Marc,
Thanks for the Files. You Rock

[mikeceleskey]

thanx marc.....you rock!!!!!!

[mattalbr]

Nice logo. Definitely interested in some decals when you get them prepped. I'll be your beta tester:D.

Thanks,
matt

[admin]

Ken just finished up the WattFlyer logo decals in vinyl. They look fantastic. I will have him post some pics and pricing for the various sizes and color options. Everyone who wants them can get them directly from Ken who owns his own vinyl cutting business RC Graphics Zone. WattFlyers portion of profit proceeds will go to ASPCA and The Human Society charities (www.aspca.org (http://www.aspca.org) & www.hsus.org (http://www.hsus.org) ).

[FlightPower]

Great logo. Nice to see something offered for free!

[TNflier]

So, where are the decals? All I see are shirts, mugs, and mousepads.

TNFLYER

[qban_flyer]

Thanks for the files. Great quality.

They'll be on all my e-planes. Will post/send photos before the week is done.

Thanks again!

[Son of Paleface]

Ok I'll put my hand up for the decals , how do I get'em ???????

[admin]

I'll have ken post here how to get them asap...hang in there. Check back tonight or tomorrow.

you can get his contact info for now here:

http://www.rcgraphicszone.com

[RCKen]

Sorry that I haven't gotten in here yet today, it's been a hectic day for me. I'm still working up prices for the graphics here. I'll try to get them posted as quickly as I can get them worked out.

Thanks for patience.

Ken

[Magoo]

Ken,


I sure would like to get some stickers for all my E-planes and Pickup truck.

Thanks,
Magoo

[Tom Lambert]

Thank you for your decal or logo files. I have been looking for a COOL decal for my electric Heli.s! Now I have!
Thanks again. TOM :o

[TNflier]

Thank you for your decal or logo files. I have been looking for a COOL decal for my electric Heli.s! Now I have!
Thanks again. TOM :o

Tom, what decal? All I have seen are t-shirts and artwork. I'd like a bunch of them.

tnflier:)

[Tom Lambert]

The WattFlyer logo files links were posted in a previous post. I just down loaded them. I was thanking the Admin. for posting them.
I found a decal sheet kit, at a local Wal-Mart store that you can make your own decals on your computer printer. I am going to print a couple for my Helis. The kit has enough material for only a few decals.
The post number was 265
Tom:rolleyes:

[TNflier]

Tom
Well, being new to this group and not familiar with the software being used to drive the chats, I am lost to know what to do with your reference to "post number 265". For example, your post here was #19, but that is #19 in this thread only.

I can prowl Wallyworld and try to make my own, but I was under the impression that someone was going to be making decals of the logo. In various sizes. Did I miss something here?

tnflier

[Tom Lambert]

Ok, the link below is the link in the post I was refering to.

http://www.wattflyer.com/logos/

Yes there was a post that someone mentioned that they were going to have some made, but they are not available yet. I belive the post was made by the Admin. on this group. Keep a watch on this board, as he said he will post when they are available.:rolleyes:

[TNflier]

OK, I am with you now. The artwork was actually linked from the first message in this thread and I had already seen it. I have seen the "make your own decal" stuff and in small quanities it is really costly. More so than I would be willing to pay. Michaels may carry it. Worth a look.

[admin]

Ken from RC GraphicsZone will be posting pricing info and some pics sometime today for those who don't want to print or cut their own. His are high quality vinyl that you put on with a single application.

[John Seidelman]

If you would like to print your own Avery has Sticker Project Paper Item 3383 15 sheets 8 1/2" x 11"

[Tom Lambert]

Thank you John. I will check it out. it may be a good sub for the expensive decal vinal.
Thanks again
Tom:rolleyes:

[admin]

Here is Ken's first shot at pricing the vinyl with me. We are both somewhat new to how vinyl is typically priced but if these are higher or lower than is typical let us know. I want these to be inline with whatever is typically charged and again the WattFlyer profit percentage will go to the registered charities.

2" graphic - single $2.95, pair $5.75
3" graphic - single $3.95, pair $7.65
4" graphic - single $4.95, pair $9.55
5" graphic - single $5.95, pair $11.45
6" graphic - single $6.95, pair $13.35
Shipping - $3.85 to US addresses.
Shipping outside US will be quoted at actual cost

If these are much higher or lower than what is typical please let me know as I could not find a pricing reference anywhere to use as a guideline. We only want the cost of materials covered and a little bit to make it worth Ken's time plus the charity portion which will be donated.

http://www.rcgraphicszone.com/wattflyer/

[TNflier]

Marc, can you explain what the dimensions refer to? Does 2" mean the entire artwork will fit inside a rectangle 2 inches tall? Can you also define the length of the graphic? Is the background clear?

Since weight is not really an issue, why not send by regular first class mail rather than Priority and reduce the shipping cost?

Thanks,

[admin]

TNflier - I will have ken answer those questions. I'm sure he can send regular if somebody requests it but the only problem is there is no tracking confirmation on first class. I'll defer to him though but I'm sure it is possible to reduce cost for shipping. I'll also have him explain the sizes. As for the background there is none. The beauty of vinyl is that only the elements of the image are created in vinyl. You apply it to your plane and the background is whatever you put it on. These differ from plain old decals in that way. They are much higher quality and look much better than a standard decal. This is what all the professionals use on their 40% plus planes.

http://www.rcgraphicszone.com/wattflyer/

[admin]

Ok...for those who need vinyl decals visit this page (http://www.wattflyer.com/forums/showthread.php?t=565&highlight=decals).

Also FMA Direct (http://www.fmadirect.com/)is sponsoring a 2nd prize for this fun contest which is a new M5 v2 receiver (https://www.fmadirect.com/site/fma.htm?body=detail&item=2056&section=1) on the frequency of your choice! The winner of the receiver will be the member who posts the MOST models sporting the WattFlyer logo.
(http://www.fmadirect.com/)https://www.fmadirect.com/site/fma.htm?body=detail&item=2056&section=1 (https://www.fmadirect.com/site/fma.htm?body=detail&item=2056&section=1)
(http://www.fmadirect.com/)

[RCKen]

TNflier,
I apologize that we don't have these set up on a regular shopping cart website yet, but we have been having troubles with the web firm we hired and the shopping cart isn't ready yet. I'll get a simple webpage up so that you all can see what these look like.

The dimension listed refers to the height of the graphic. Here are the exact dimensions for each graphic listed above.

2"h x 4"w - single $2.95, pair $5.75
3"h x 6"w - single $3.95, pair $7.65
4"h x 8"w - single $4.95, pair $9.55
5"h x 10"w - single $5.95, pair $11.45
6"h x 12"w- single $6.95, pair $13.35

Available colors are light blue, dark blue, Red, Cub Yellow, Green, Orange, Purple, and a grey.

The shipping cost is for a USPS Priority envelope. Sending first class only works for the first 2 sizes of graphics, and anything bigger needs to be in a larger envelope. We choose to use the USPS Priority envelope so there would be a standard shipping charge on all of the graphics above.

http://www.rcgraphicszone.com/wattflyer/

Please feel free to PM me of you have any questions.

Ken

[admin]

You can hit ken here via PM or email by clicking on his name to ask questions or order right now too.


http://www.rcgraphicszone.com/wattflyer/

[locolobot]

How do you go about subscribing to a thread? Also a obivous link to your contest would be helpful. Thanks I am sending my pictures today.

[Mike Parsons]

How do you go about subscribing to a thread? Also a obivous link to your contest would be helpful. Thanks I am sending my pictures today.
Hey locolobot,
There are a couple of ways to accomplish this. One is by simply posting in the thread itself as you have done and the other is by clicking on "thread tools" which resides on the bar just above the first post of the page and then choosing "Subscribe to this thread".

Here is the thread on the contest.
http://www.wattflyer.com/forums/showthread.php?t=667

Cheers,
Mike

[Tore Loodin]

Hello Watt administrator!
I would like to have a little picture under mu signature. I would also like to send some pictures of my models. Are there som rules for the size of the pics?
Tore Loodin from Sweden

[admin]

Hello Watt administrator!
I would like to have a little picture under mu signature. I would also like to send some pictures of my models. Are there som rules for the size of the pics?
Tore Loodin from Sweden

Instead of a picture in your signature try an "avatar". Click User CP and then Edit Avatar link and you can upload a picture that will appear under your username like I have.

you can attach pictures. Right now if you click the reply, quote or advanced buttons you will see the manage attachments button which allows you to upload photos. Right now you need to upload under 100k filesize and I think 1024x768 pixels or smaller but the upload window will give you specifics. An auto image resize will be coded into the software soon so you don't have to resize on your end.

[admin]

Ok...for those who need vinyl decals visit this page (http://www.wattflyer.com/forums/showthread.php?t=565&highlight=decals).

Also FMA Direct (http://www.fmadirect.com/)is sponsoring a 2nd prize for this fun contest which is a new M5 v2 receiver (https://www.fmadirect.com/site/fma.htm?body=detail&item=2056&section=1) on the frequency of your choice! The winner of the receiver will be the member who posts the MOST models sporting the WattFlyer logo.
(http://www.fmadirect.com/)https://www.fmadirect.com/site/fma.htm?body=detail&item=2056&section=1 (https://www.fmadirect.com/site/fma.htm?body=detail&item=2056&section=1)
(http://www.fmadirect.com/)

The 2nd prize is the M5 which goes to qban_flyer. I mistakenly posted the ammo earlier (long day!). The ammo goes to the top single model.

marc

[qban_flyer]

The 2nd prize is the M5 which goes to qban_flyer. I mistakenly posted the ammo earlier (long day!). The ammo goes to the top single model.

marc

Thanks for the clarification Marc.

Take care

:)

[BalsaElectric]

Pick up WattFlyer logo in jpg and illustrator formats here.

http://www.wattflyer.com/logos/

the zip file is the same as the .ai (illustrator) file just zipped up.

The jpg is a higher res 300 dpi version. If anyone needs custom file types or sizes and cannot work with these files just PM me.

You have express permission to use these as you like to create prints, decals, t-shirts, etc

I am having our vinyl cutter (Ken Isaac aka RCKen) create from these files vinyl decals in all sizes and color combos. If you are interested you can PM or email him here on Wattflyer and anyone can buy direct. His work is always perfect. I have instructed him to keep his normal profit for his time and material and for WattFlyer's percentage he can donate that to charity (The Humane Society (http://www.hsus.org)and ASPCA (http://www.aspca.org)). Link below to RC GraphicsZone:

http://www.rcgraphicszone.com/wattflyer/

Also Mike Parsons set up this CafePress shop with some WattFlyer schwag. all items are listed for sale at cost.

http://www.cafepress.com/wattflyer


FMB, This might help also.

[admin]

Updated 5/5/07 with new design logo in both psd and ai formats

[admin]

Ken at RC Graphics Zone will be updating with the new stuff hopefully over the weekend. I just realized the link was bad and he probably had the old logo up there. He is now aware of it and I'll have an eta from him shortly but he is usually quick to update! thanks all and happy flying this weekend.

marc

[Tore Loodin]

Hello Mr Administrator!
When trying to reply tor an Watt message i often will affic an picture. Then the Watt program asks for the URL of the picture. What stands "URI" for and where can I obtain this "URL" for the picture I wish to send?
Regards
Tore Loodin

[Nathan]

Hello Mr Administrator!
When trying to reply tor an Watt message i often will affic an picture. Then the Watt program asks for the URL of the picture. What stands "URI" for and where can I obtain this "URL" for the picture I wish to send?
Regards
Tore Loodin

The URL is the website address of the image. It should look something like this: http://www.website.com/image.jpg

[Tore Loodin]

http://www.wattflyer.com/forums/www.my%20website.com/myimg.jpg

At the first flight, my Coronet 400 was cought by an evil tree. My good friend the farmer Mats Jonasson, rushed to help with the trucklift. My intrepid friend Linne was lifted in its showel and rescued the model, which only sustained small damages.
Tore from Sweden

[Mike Parsons]

WattFlyer Swag...It's Official! Read the announcment here:

http://www.wattflyer.com/forums/showthread.php?p=210341#post210341