PDA

View Full Version : 1/4 GP SpaceWalker


mmmdowning
03-28-2006, 01:50 PM
Has anyone converted one to electric? I have a extra AXI 5320 that might work. I'm looking around 10-10.5 lbs. With 10s2p 5400mah battery pack.

Or use the Axi 4130/20 in it?

Jay Stargel
03-30-2006, 02:53 AM
Has anyone converted one to electric? I have a extra AXI 5320 that might work. I'm looking around 10-10.5 lbs. With 10s2p 5400mah battery pack.

Or use the Axi 4130/20 in it?As for as I can tell after talking with Hobby Lobby that motor should be more then enough power for a 10.5 lb plane. In fact it should go vertical. I is a good choice as you already have one, you will be able to fly at 1/2 throtal and get longer flights.

Ron
03-30-2006, 03:23 AM
The Axi 4130/20 on 6S will swing an 18X12 prop....this combination is in a 10 1/2 pound model that I own, and it just rips off the ground.I don't know how long the flights are with my 8mah packs, but on Sanyo 2600 ( 20 of them ) it did about ten min.( in a Sig 1/4 size spacewalker)

mmmdowning
03-30-2006, 11:17 AM
Thanks guys. It's good to hear setups from others just to be sure.