View Full Version : E-Flite 250 trouble
05-12-2011, 09:44 PM
Hey guys. I'm having trouble with my E-flite 250 brushless. It's plugged into a e-flite 10amp esc and a 430mah 2s 7.4v battery. I've charged the battery and set up everything by the book. When I run the engine, it'll run for a few seconds and then shut off. What am I missing?
05-13-2011, 12:19 PM
Make sure the ESC is programmed for 2S. Also, try running with no prop and see if you can get sustained running. Measure the loaded voltage to be sure it's not being pulled down too far.
vBulletin® v3.8.3, Copyright ©2000-2014, Jelsoft Enterprises Ltd.