PDA

View Full Version : Sea Fury from Fellside Precision


tim hooper
04-19-2006, 11:36 PM
Gents,

Just thought I'd share a few pics of the pre-production prototype of the 37" Sea Fury from Fellside Precision Cutting here in the UK.

This is a 'short' kit of balsa and ply CNC-cut parts. Purchasers will have to supply some sheet balsa and all hardware. Production kits will feature an acetate canopy.

My Fury is glassed overall and needed a fair bit of lead upfront, resulting in an AUW of 29oz. I understand that future kits will have a lightened tail assembly, so should come in a few ounces lighter!

I've used a Typhoon15 outrunner, 8x6 APC and 3S1P 1800 li-po as power. The model performs smooth aerobatics and there is no hint of any tipstall. Very nice! :D

Fellside can be found here;

http://www.fellsideprecisioncutting.co.uk/index.htm

tim

crast test dummie
04-20-2006, 12:37 AM
Nice lookin bird Tim!

CTD