View Full Version : Logo 10-3D Finishing Touches
08-27-2005, 06:34 AM
Jay (from the micro sized electric heli forum) wanted to too see my Logo10-3D build...i'm waiting on a kontronik 55-10-32 esc, then i'll solder-in the ubec...here's a coupla pics taken in my wife's herb garden...;)
09-01-2005, 03:27 AM
Very nice Ken. Your finished model looks very nice. The logo looks like a clean, simple layout. The carbon model is nice. Are all the kit parts stock? Boom, fins ect... Again, very nice job Ken, I am almost done with my Quick build up, I will post some pics... Is it cooling off there yet? It is starting to get cold here. But moose hunting opens tom. morning and I am stoked. My wife said if I get my moose she will buy me an XRB for my B-day! (saves us that much in meat costs) Wives can be a wonderful thing. I see whole threads about hiding rc cost from your wife.. It is like I seen Debhicks post once "go look in the closet, I bet you find something new there". My wife loves cloths, I love rc. We both love our four wheelers. My wife doesn't fly rc, but she has a mean Kyosho "Twin force" I set up with a 5409L BL motor and a shulze 100 amp esc. UBEC (gotta have UBEC for steering servos)
Anyway Ken, tell the MRS. she has a very nice herb garden. I can't wait to see a pic of that pretty Logo in an inverted hover! I am still working on getting my Trex to sit still after rolling it over. Kind of an erratic 30ish foot circle. I guess practice is the fun part!
Thank you kindly for sharing your new Logo. Sorry for the long post. I kinda went off babbling. In person I am much worse. Blah, Blah, Blah!
Take care and keep your stick on the ice!
09-01-2005, 07:04 AM
hi zapped...the logo is a completely stock 3d model, which has these extras:
The LOGO 10 3D comes with the following hop-ups: PartDescriptionPrice2322 Mixing arms ball bearing$16.002359 Paddles lightweight 3mm 16g$22.002366 Swashplate Aluminum$80.002447 Tail rotor lever ball-raced$16.002712 Blades FG Symmetrical 500mm$79.002756 Damper rubber, set for 3d$4.002761 Tail Boom Brace$9.002780 Vertical stabilizer carbon$25.002781 Horizontal stabilizer carbon$30.003030 Seesaw/tail pitch plate$9.00Total Value$290.00
the quick looks like a very nice heli...there's some details that could be improved on the logo...maybe they're addressed in the swift...don't hold your breath on seeing my logo in an inverted hover...occasionally i try it with my reflex xtr sim...btw, the mailman dropped off my kontronik esc today...the manual is pretty intimidating...good thing some of my friends are very good at setting up ccpm...happy hovering. ken :)
09-01-2005, 02:07 PM
I snapped a few pictures of my Quickie Pro Kit. I am going to build today.
I am very happy with the quality. one thing I really like is you can mount the rudder servo from either side and it mounts right to the Main frame. I am ordering another kit on friday. The owner made me a deal I couldn't pass up. Anyway here is a Quickie 8 (Pro model) kit.....
1. What you see when you open the box, including free T-shirt:
2. The Decals Removed from the box:
3. The contents of the kit laid out on the floor:
4. The canopy sitting next to a Trex. (for a size comparison)
5. The Frame Plates. (Pro model)
Sorry for the huge pictures, I need to adjust my camera.
Take care and have a good one,
09-01-2005, 10:49 PM
nice...looking forward to seeing the finished build...btw, if you visit this link and download the 'image resizer', you can post pics that take up less memory and fit the page...
Thanks for posting the pics guys, keep em coming!
I love the look of the Mikado 3d, and have been looking at the Quick heli's as well.
Im just a tart for new stuff lol :)
09-22-2005, 06:27 AM
typically, one uses a y-adapter to connect the ubec or rx batt pack to a servo port on the berg6 (which does not have a 'bat' port.) i was pondering how to make the connection when my friend showed me how he wired his logo 10-3d. the gy401 has a single wire (signal) connector that plugs into rx channel 5 for remote gain adjustment. the ubec has a two-wire (pos, neg) connector that plugs into any rx channel port. so my friend combined the gy401 single wire with the ubec two-wire connector, resulting in a 3-wire connector (signal, pos, neg) plugged into channel 5. no y-adapter needed, and it works.
09-25-2005, 05:46 AM
I flew my logo for the first time today. verrrry nice. everything worked perfectly. this should close out this thread. yeee haaa!
11-03-2005, 12:57 AM
Well done and welcome to the logo flyers club.
11-03-2005, 01:47 AM
vBulletin® v3.8.3, Copyright ©2000-2013, Jelsoft Enterprises Ltd.