PDA

View Full Version : 7900 Servo Mount Template


JediFlyer
08-31-2006, 02:07 PM
Tonystott on the other forum showed a picture of how he mounts a servo to his Samsung camera. It was a good idea and I decided to draw one up for my 7900. Basically, it sets on top and you glue the servo to the mount. A wire goes from the end into the arm strap hole and you use rubberbands to hold down the other end near the selection knob....Even though I marked the power button hole..it will be covered by the servo

JediFlyer
10-06-2006, 09:13 PM
Workin on a modified version of this as I dont really like the idea of having to turn the camera on before getting it up and having to land with the lens extended...I want to be able to turn on/off the camera..By cutting out where the shutter and on/off switches are I can use the rounded servo arm with nubs that came with the GWS Pico to turn off the camera when I need to. I would be anxious to get this cut out and give it a try...but have to go to Charlotte this weekend...PLUS...I am requiring myself a few more hours of flight time with the PIE before I attach my 7900