Rimfire Brushless Question

[ThunderVee]

I need to know if the rimfire brushless setup that is for the flatout foamies will work on the hobby lobby hot rod? I pretty much wiped out my cap 580 acting like a fool so I need a replacement, I will buy another flatout if it wont work on the hot rod..
Thank's for the help guy's

[Ron S]

Is it the BIG Hot Rod,or the Minni? If it's the minni it should work fine! If it's the big one it will take a pretty hot motor to get the performance you need. I use a Himax Outrunner,it has ton's of power on heavier planes. I fly my Flatana on the stock motor,it's ready to fly weight (including battrie) is 7.6 oz. I use a 2s860mh Lipo,and it has plenty of power to do about anything you want. The nice thing about having a hot motor is that you have all kinda of power in reserve. My Fancy Foam Cap 232 will hover at 1/3 throttle. With a 3s 1200mh Lipo,and the Himax Outrunner. The flying weight is around 14oz. Ron:)

[40bigstik]

Will the rimfire work with a castle creations 10amp esc?

[ThunderVee]

The mini hot rod is what I was wondering about , thank's

[mountaindr3wz]

cool i have the hot rod mini too but i havent reacived it in the mail yet. but how powerful is the rimfire will the hot rod mini hover below half throttle with the rimfire?

[Boss248]

Will the rimfire work with a castle creations 10amp esc?
Yes

Boss

[rcguy9999]

i think the rimfire works on any foamie

[L0stS0ul]

I bought my buddy an Ultrafly Outrage and he's flying that at around 10 ounces on the power setup recommended for the Flatouts (had a flatana before) It flies very well on the recommended flatana setup.

[Chays23]

rimfire is made for foamies and "most" built ups....as long as the "built up" isnt a pig