WattFlyer RC Electric Flight Forums - Discuss radio control eflight

WattFlyer RC Electric Flight Forums - Discuss radio control eflight (http://www.Wattflyer.com/forums/index.php)
-   RC Radios, Transmitters, Receivers, Servos, gyros (http://www.Wattflyer.com/forums/forumdisplay.php?f=68)
-   -   DX6i & DX6 Compatibility (http://www.Wattflyer.com/forums/showthread.php?t=67839)

Crusader10 08-29-2012 05:31 AM

DX6i & DX6 Compatibility
 
I have an older DX6 that I would like to use as the slave in a buddy box setup, using a DX6i as the master.
Since the DX6i uses a 6 volt power system, and the DX6 uses a 12 volt system, will there be any compatability problems?
I would hate to toast the DX6i, due to overvoltage.

pilotpete2 09-04-2012 10:25 PM

No problem at all, since the JR/Spektrum training system does not provide any power connection between the radios, only the PPM signal is sent over the buddy cord.
Pete


All times are GMT +1. The time now is 03:56 AM.

Powered by: vBulletin
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 2005 WattfFlyer.com
RCU Eflight HQ

Page generated in 0.06804 seconds with 13 queries