WattFlyer RC Electric Flight Forums - Discuss radio control eflight

WattFlyer RC Electric Flight Forums - Discuss radio control eflight (http://www.Wattflyer.com/forums/index.php)
-   General Electric Discussions (http://www.Wattflyer.com/forums/forumdisplay.php?f=3)
-   -   World models voodoo 46 (http://www.Wattflyer.com/forums/showthread.php?t=69284)

Stangfreak2001 01-09-2013 07:22 PM

World models voodoo 46
 
I just started a brushless conversion on the world models voodoo 46. This is my first conversion. Im looking for SPEED (100+MPH....shooting for 125+) since its a Reno racer. Its 57.5" span ans should weight in around 6.5-7lbs. Want to run the Eflite power 52 motor, castle creations phoenix ice lite 100, and a 10x10-11x8 prop, on a 6s. What do y'all think of this set up? Any concerns? Tips? Any info is helpful......

CNY_Dave 01-09-2013 09:20 PM

If your experience level is low, make sure to video the maiden! ;)

Otherwise, make sure we get a flyby after you get it dialed in.


http://www.rcpro.org/html/rules/club...ang46Large.jpg

Stangfreak2001 01-09-2013 09:52 PM

I've got plenty of flying experience ... mostly 3din' with extra 300's, or edge 540's. I've got the flying down pat, its the actual converting the nitro to electric part I've never done. I got the brains to make it work just not the knowledge to make it perform at its best. I've got the firewall forward built just need some tips on motor and prop selection and this whole power to watts thing... ... when in doubt just go bigger!..... btw ill be sure to get some good video and get it posted. It'll either be a fire ball or ridiculously fast!...


All times are GMT +1. The time now is 02:54 AM.

Powered by: vBulletin
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 2005 WattfFlyer.com
RCU Eflight HQ

Page generated in 0.07447 seconds with 13 queries