WattFlyer RC Electric Flight Forums - Discuss radio control eflight

WattFlyer RC Electric Flight Forums - Discuss radio control eflight (http://www.Wattflyer.com/forums/index.php)
-   Beginners - Helis (http://www.Wattflyer.com/forums/forumdisplay.php?f=66)
-   -   Little intro (http://www.Wattflyer.com/forums/showthread.php?t=72834)

BroncoSquid 12-20-2013 03:48 PM

Little intro
 
Hey,
I'm Chris, I just happen to know that there is a little Blade 120SR BNF sitting under my tree right now.:D Been on WF for a while and this is my first post in the Heli area. I know less about Roundy-Roundy wing things than I do Airplanes.

I can tell you this heli was not bought on a whim, alot of questions were asked and research done before telling the wife what to get. This is to be an indoor, when it is too dark or windy to fly experience. I decided to forgo the coax heli's due to the advise that they are a completely diffrent animal. She will be bound to a DX8.

So, first question, what is most likely the first thing I am going to have to replace after crashing? And please don't say my TV.:<:

Heli Jim 12-20-2013 05:45 PM

Blades are probably the most frequent replacement....both main and tail
the is a little rod between the lmain blade holder called a spindle (of feathering
shaft) that sometimes bends, too.

Other items are main shafts and skids.

JetPlaneFlyer 12-20-2013 07:14 PM

If you fly it outdoors over grass then there is much less chance of doing damage. Try it indoors only once you get the hang of it.

BroncoSquid 12-21-2013 02:56 PM

OK, thanks guys. Main rotor blades, Tail Rotor Blade, a Spindle shaft or Feathering shaft? A couple of extra batteries and I see alot of people have extra landing skids too. 4 LONG days to wait.:mad:

BroncoSquid 12-22-2013 02:55 PM

Ghost of Christmas future????
 
https://www.youtube.com/watch?v=F3CVjfMkB_I

:eek:


All times are GMT +1. The time now is 05:16 PM.

Powered by: vBulletin
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 2005 WattfFlyer.com
RCU Eflight HQ

Page generated in 0.08144 seconds with 13 queries