WattFlyer RC Electric Flight Forums - Discuss radio control eflight

WattFlyer RC Electric Flight Forums - Discuss radio control eflight (http://www.Wattflyer.com/forums/index.php)
-   Batteries & Chargers (http://www.Wattflyer.com/forums/forumdisplay.php?f=6)
-   -   converting a server power supply DPS 450FB A (http://www.Wattflyer.com/forums/showthread.php?t=73368)

remydehaenen 03-18-2014 04:22 AM

converting a server power supply DPS 450FB A
 
I have pulled out of a Dell server a power supply DPS 450FB A. It is used and in working condition. I want to convert it to a 12V PS. It starts when I plug the circuit board (and do the usual green/black connection) to which the ps was connected inside the server but it an uneasy set up. I have not been able to start the PS by connecting directly in some arrangement which I found on the www the out pins of the PS. Does anybody have experience and could sent me the proper wiring of the out pins to start the PS?
Thank you

JetPlaneFlyer 03-18-2014 06:58 AM

Guys posting in theis thread claim to have done it, and a pin-out is included: http://www.rcgroups.com/forums/showt...05309&page=120

remydehaenen 03-31-2014 03:00 AM

thank you for info but no luck So i have wired the PS together with the circuit board. On this board were plugged 2 X DPS 450 . This is perhaps why I am having the problem not being able to start the PS as indicated on the rc group chanel


All times are GMT +1. The time now is 06:14 PM.

Powered by: vBulletin
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 2005 WattfFlyer.com
RCU Eflight HQ

Page generated in 0.07582 seconds with 13 queries