WattFlyer RC Electric Flight Forums - Discuss radio control eflight

WattFlyer RC Electric Flight Forums - Discuss radio control eflight (http://www.Wattflyer.com/forums/index.php)
-   General Electric Discussions (http://www.Wattflyer.com/forums/forumdisplay.php?f=3)
-   -   Digtal to Standard (http://www.Wattflyer.com/forums/showthread.php?t=73903)

egrave1 06-16-2014 04:46 PM

Digtal to Standard
 
I have a futaba 7C TX. What I want to know is I have one airplane on a standard rx and one on digital do I have to make any kind of change

rcers 06-16-2014 05:16 PM

I assume you are talking about servos? If so, they will both work well together. No changes on the 7c.

Mike

egrave1 06-16-2014 05:33 PM

Thank you Mike

kyleservicetech 06-17-2014 05:02 AM

Quote:

Originally Posted by rcers (Post 950619)
I assume you are talking about servos? If so, they will both work well together. No changes on the 7c.

Mike

Yeah
Last year I did some oscilloscope tests on various servos made by Futaba, Hitec, Tower and a few other brands, using a variable DC power supply. These servos were up to 10 years old.

As for compatibility issues between servos, absolutely none were found.

rcers 06-17-2014 01:03 PM

Quote:

Originally Posted by kyleservicetech (Post 950667)
Yeah
Last year I did some oscilloscope tests on various servos made by Futaba, Hitec, Tower and a few other brands, using a variable DC power supply. These servos were up to 10 years old.

As for compatibility issues between servos, absolutely none were found.

Agree, but with some of the newer "ultra" fast radios with settings that really require ultra fast digital servos to take advantage of the speed of the TX.

The 7c in NOT one of those radios, but there are a few and I had issues on my recent Graupner review with some servos on the faster settings. Setting that TX down to a slower setting resolved all the issues.

Never had any issues on my DX18 however - even at the fastest settings.

Technology - hard to keep up!

Mike


All times are GMT +1. The time now is 02:45 AM.

Powered by: vBulletin
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 2005 WattfFlyer.com
RCU Eflight HQ

Page generated in 0.07610 seconds with 13 queries