[guapoman2000]

Carter showing the real capabilities of this fine "Dynam SR Trainer" RC Airplane model. The foam is the best density and very smooth! It does not look like a Foam model due to the dense EPO Foam and the hardware and Electronics plus the Stock 3-Blade Propeller is the best he has seen.

He did say that after the 6th Flight / Landing the Nose gear started to wobble and it was starting to come lose but, of course his place of flying is rutty Grass field and nothing that a little CA could not solve at the plastic plate -to- Foam bulkhead.

Also, he really does not think that this is a "Trainer" from the perspective that the model would not stand up to very hard landings as the propeller, adapter and motor would be damaged easily from a hard nose first landing as it is pretty small and type of propeller adapter might bend the shaft of the motor.

The model has very good flying abilities with the Stock power system and he praised the Servos and overall quality of the model.

Go Nitro Planes! Go Dynam!


VIDEOS:

Dynam SR Trainer (Part 1) 12-16-2010 on Vimeo

Dynam SR Trainer (Part 2) 12-16-2010 on Vimeo

Pictures: