Originally Posted by dumo01
The rudder and elevator control arms have multiple holes so you can adjust the physical control throw, moving the arm in closer to the control surface will reduce the amount of surface travel,
just to clarify and prevent anyone making the situation worse...
Moving the pushrod onto a hole position closer to the surface will INCREASE throw, not reduce it. to reduce it you need to move the pushrod outward on the horn. Opposite applies on the servo end, but that's not an option with linear servos.
Here are some photos of my Brushless converted Su. Notable features:
- 5g brushless motor.
- 2cell lipo mounted in an extended belly slot.
- Carbon stiffeners in both elevator and rudder.
All up weight with brushless conversion and carbon stiffeners is 38g, only a couple of grams up on stock... flies like you would expect