In my full range gliders that I usually speck out, I plan on using 6200s or 6250s as recommended by Spektrum.
What I dont get is these micros were made for small parkflyers that cant accommodate a rx with a satellite. I currently have 5 parkflyers and 3D foamies that use the 6100 or 6110 with hundreds of successful flights logged and never an issue. Some of these planes have even less room in the fuse than this Bipe did, so the rx was as far back away from the motor and esc as possible.
I just put the motor with prop on a vice and attempted to mock a full flight trying to overload the BEC. I still couldn't get it to brownout again. I'm at a loss for what happend. I will definitely run an external BEC on my next flight with this power set and swap out the rx.
Thanks for the recommendation, looks like a nice flyer