Finished off the wings, built them as one piece, with alloy tubes built into the centre section, then cut in two and finished as per the pics. Laid the model out with the spats and wings to see the finished shape!
Ordered the motor today, Overlander V2 brushless 980 kv / 770w. The powerpack is a Turnigy 5000mAh 4 cell lipo with 60A esc, which were on board for the weighing (ready to fly - less motor - 7.5lbs) which shouldn't be too bad..
Just in the process of finishing the undercarriage fairings and spat retaining brackets. The windscreen is the next fiddley job to do - then motor installation....then...maybe a test flight??
