Thanks for the update. I'm glad that it is working out for you.
You mention that two of the holes are further out. Are those two further spaced holes on the mount or on the motor?
Just trying to figure out what your motor spacing is. Sounds like it might be a 16mm x 16mm or 19mm x 19mm bolt pattern.
My mount has two holes 16mm apart and two holes 19mm apart. Let me which it lines up with.
Also, how does the motor fit under the cowl, any issues with rubbing in the front or on the sides of the cowl? Did you have to modify anything, or did everything just bolt on nicely.
I may make a small change to the mount and include a 4 slots ranging from 16mm to 19mm. This will allow for 16x16, 16x19, and 19x19mm bolt patterns.
Let me know.
Thanks,
Terry
|