Originally Posted by bimmerland
Thanks all for your help. Bottom line.
Turnigy 32 outrunner
45a ESC
Hitech 485 servos
3200mah 11.1 20C Lipo
Spektrum sport 500 receiver
Have I missed anything? Thanks again....
Might be a good idea to run your numbers of your model and power setup through
www.motocalc.com.
That Turnigy motor is rated three to four LiPos, so with 4 LiPo's, an 12/6 prop would be in the ball park. Motocalc suggests the Turnigy motor will turn this prop around 9700 RPM, 47 Amps, 13.8 Volts 650 watts, 86% efficiency, and putting out about 90 ounces of thrust on the ground. Raqte of climb is esitmated at about 1700 feet per minute, based on a total weight of 73 ounces.
All in all, for that motor, and that model, pretty good.