This will be my second plane. My first/current plane is an E-Flight Apprentice with a bumch of modifications. I adapted to it quick with the help of the Realflight 6 simulator. I have spent a bunch of time with an Edge 540 3D plane on Realflight 6. The plane I am looking at it located here: http://www.hobbyking.com/hobbyking/s...arehouse_.html
I was also further impressed by it after seeing the review done by the Josh's ovet at Flitetest.com. Here is their review: http://flitetest.com/articles/edge-540/
I am tempted to just follow the HobbyKing recommendation on parts, but the guys at flitetest used different equipment, and the motor they used specifically, now has a dead link on their page that goes to HobbyKing.
This would be my first 3D plane, and I want to do it right. I already have a Spektrum DX8 and AR600 to use in this plane. Or AR8000 more likely if I swap it out with my Apprentice. Looking to do this reasonably inexpensive, and through Hobbyking if possible. They seemed to be happy with the 929, and 939 servo's, and the 60A Plush ESC. But the motor seems to have left the HK inventory.
Any recommendations on how to outfit the motor on this plane? Or any other items I should look to outfit differently?