I've just put together the latest release from extreme flight, the 48" Laser EXP
Assembly was a piece of cake and as usual for Extreme Flight the quality is top notch.
ZCT 60A ESC
Gens Ace 2200mAh, 4s, 30c LiPo
13" x 7" Xoar prop
3 x Savox SH-0257MG Digitals servos and 1 x Savox SH-0257MG Digital on the elevator
Weight is 51oz ready to fly and I'm getting around 900W. Maiden went without a hitch, only a click of right trim and slight some tweaking of the CG was needed to have it fully sorted. In flight it's superb, it's capable of a lot more than i am but it's also an easy plane to fly with no bad habits at all. It's very stable in harrier flight but is also capable of some really violent extreme 3D lunacy.
Highly recommended for anyone looking for a quality balsa 3D model in this size range.