Originally Posted by CHELLIE
On all the reports on the T28 Durafly TROJAN, everyone is saying that the CG is way off, to be on the safe side, set the CG at 25% of the wing cord, 1/4 of the way back from the front leading edge, 25% back is a very very safe place to start from, and move the CG back if you need to a little at a time untill you find the sweet spot, every review i have read, says that the MFG recomended CG is Tail Heavy, hope that helps, Chellie
I will do so as u adviced . I also found this CG pic for the T28 TROJAN.
Need to see if this is 25% from leading edge going back....says it is 2-5/8 inch behing LE.
2 questions :
You always measure from LE that is touching the plane's body right?
After that you mark that with a X and let the wing rest on your finger tip on each side and it should be a lil' nose heavy correct?
If so ...does it matter if I move the finger width wise along the wing few inches from the plane body?