Hi, If your power system is in this ball park, you should be ok.
Here's Everything you'll need:
Radio
1 -
SPM7800 DX7s 7 Ch w/ AR8000 NO SX's MD2
2 -
HT0605 24" Aileron Extension w/Gold Pins
1 - Voltage Regulator with Failsafe Switch, 6V
Motor/Prop
1 -
PM532034 AXI Gold 5320/34 Outrunner Motor
1 -
PE2012W 20x12 Thin Electric Prop
Motor Controller
1 -
ERCE085P eRC 85A Brushless Programmable Opto ESC
1 -
ERCE02 eRC Electronic Programmer
Battery
2 -
VNR15019 5000mAh 4S 14.8v 25C LiPo
1 -
WSD7002 Series Module w/Deans Ultra Connectors
Charger
1 -
SRC6200 B6 Ultimate 200W Balance Charger for 1-6 Lipo Cells
Accessories
Includes: Glue, Solder, Connectors, etc.
additional info
Hangar 9 quarter scale Champ
1 of 1 people found this posting helpful
Review by Gibouleau, Ray (Maine USA) on Aug 01, 2011
Great looking and flying model. Power by a Rimfire 1.20 with 2 5000 mah lipos. Rimfire .60 would be better, as the 1.20 is too much motor for scale flying unless its on floats. But the finished airplane is beautiful and gets lots of positive comments. Very happy with it. The bottom hatch on the nose came off on landing; perhaps the holding spring needs to be beefed up somewhat.