Will do I was thinking if the screws are long enough I could put washers between the motor and the mount on the bottom 2 screws and that will give it some down thrust. I will get a pic and post it. I do have to get a new prop rookie mistake it has a long threaded shaft and I put a prop saver on it but didn't cut the shaft off so on the landing the prop hit the ground & broke. That was the 1 thing I had on my list to get today while at the hobby shop and forgot. I think I'll just order them from heads up since I can only get to the hobby shop on saturdays and it's about a 45min. drive one way and 10 to 3 is the hours plus the owner doesn't seem to thrilled to help with ? about a plane I didn't buy from his store even if I'm buying parts from him for the build. A little time will tell and I rather support a local hobby shop if I can by buying from them to many have closed down already. I used to race rc cars but all the places closed so my cars are dust collectors.
|