I'm trying to get back into flying 50 years after my first attempts at RC using a one radio tube, one channel outfit using an escapement (powered by a rubber band) to control the rudder.
Decided to go with a Slo Stick, brushless motor outfit to train myself again.
This required I buy a brushless ESC so got a 20 Amp Eflite....and a battery, so got a couple of Electrifly lipos....1200 mah, 7.4v 9Wh.
Also got a Tenergy TB6B charger in order to charge the lipos. Had a donated transmitter/reciever and a couple of micro servers. (Tactic 2.4 gh TTX440).
I'm ready to put this together. Need to balance charge the batteries.
Danged if I can figure out the Chingrese of this charger manual!
Can someone talk me thru the initial setup to charge a 2 cell lipo?
For beginners, my initial LCD screen sez "User Set....Program"
Lipo V. Type 3.7v
From there I am lost...can't find a screen for these 7.4v lipos
Thx , Ken