Here is my Albatross build.
It will be made out of DollarTree Foam Board and should not cost over 3 bucks.
I have all the other parts and glue in stock.
It will be a 32inch wingspan and the Motor is a Emax CF2822 the servo's are TowerPro 90
I use a 3s 1000mah Batt. for most of my planes and that's what i will be using on this one.
I got the plans all printed and cut and pasted together and i have started cutting foam.
I have no way to do a Video so i will not qualify for the prize.