Thread: Setting Trim
View Single Post
Old 12-15-2013, 02:44 AM   #1
thepiper92's Avatar
Join Date: Nov 2013
Location: Winnipeg, Canada
Posts: 614
Thanked 14 Times in 14 Posts
iTrader: (0)
Friends: (1)
Default Setting Trim

I have a small issue with my Mini Switch. I am using a HK 9xr radio. I set up the trim perfectly in my home, and the rudder and elevator are spot on. When I get outside to the field, or area of snow now, the trims are off on the elevator and rudder when I turn the transmitter and plane on. The rudder veers to the right and the elevator trims up. I don't know what it is, the ailerons work fine. There isn't an extreme right on the rudder or up on the elevator, but enough that I need to adjust the trim on the transmitter, despite the trim being perfect at home with the trim on the transmitter set to zero. It's really quite annoying, because I can set up the plane great and then it is a hassle to fly and it takes away from initial enjoyment.
thepiper92 is online now  
  Reply With Quote
Page generated in 0.08396 seconds with 17 queries