View Single Post
Old 02-19-2014, 02:14 PM   #2
Leadchucker
Curmudgeon
 
Leadchucker's Avatar
 
Join Date: Jul 2008
Location: Turdy Turd and Turd Streets
Posts: 230
View Leadchucker's Gallery9
Thanked 25 Times in 25 Posts
Club: R/C Club
Awards Showcase

60 Minute Thermal Duration  45 Minute Thermal Duration  30 Minute Thermal Duration 
iTrader: (0)
Friends: (2)
Default

Flying it as a sailplane,i.e: climb and glide, you won't need any vents. Motor runs are short and minimal heating will occur. Hotliner style flying you would want some cooling. I'm running 800+ watt jobs with no vents and it's not a problem.
The motor is not an inrunner BTW, it's a outrunner in a case like the MVVS sailplane motors, they call it a inrunner/outrunner. I have three of the MVVS motors and while a tick heavy they are nice for tight nose applications with the motor wire connections mounted on the rear casing. No wires to pack away under the motor and get wrapped up in the spinning rotor casing.

AMA 7224 -- League of Silent Flight 1832-- Eastern Soaring League
National Free Flight Society-- Society of Antique Modelers
Leadchucker is offline  
  Reply With Quote
 
Page generated in 0.10547 seconds with 17 queries