View Single Post
Old 03-21-2014, 04:15 AM   #1
abborgogna
Member
 
Join Date: Nov 2013
Posts: 57
Thanked 0 Times in 0 Posts
iTrader: (0)
Friends: (0)
Default Serious problem with my pusher jet.

I just finished putting together a pusher version of the Su-27 and I have an ESC/Motor problem. With extension cables between the ESC and the battery the motor does not want to run. The receiver and servos all work fine, just the motor will not work. Without the extension cables everything works fine. l have had this problem on three different ESCs and with the extension cables between the motor and the ESC or the battery and the ESC. I have also swapped the motor and still have the problem. It seems I am dropping two much voltage between the ESC and what it is connected to. The extension is approximately 11.75 inches and I am using 12 gauge wire made for use electric model airplane applications.

Has anybody else had this problem.
Andy
abborgogna is offline  
  Reply With Quote
 
Page generated in 0.10416 seconds with 17 queries