What we have here is a Align Trex 450 Fixed-Pitched Conversion. This has a Multiplex Funcopter fixed pitched rotor head on it. Head has been drilled out to accept Align 5mm main shaft. It also has a notch dremeled out to take the Funcopter Jesus bolt. Motor wires have been reversed to have the rotor head run counterclockwise instead of clockwise. The oneway bearing has also been reversed. That's the direction the Funcopters run. Also the tail rotor belt has been flipped to run the right direction. The rotor head has 6 degree blade grips instead of the normal 5 degree grips (more lift). The rotor head is brand new. I'm am including a original Align Trex 450 rotorhead in case you want to switch it back to a collective pitch heli. Heli comes installed with:
Align 430L motor with heatsink
Align 35amp esc
Hitec HS 65hb cyclic servos
Futaba s9257 tail servo
Original Futaba GY401 gyro
Spektrum ar6100 receiver
New Fusuno Canopy
New Fusuno horizontal & vertical fins
New Align Trex 500 skids
New Align 68mm tail blades
Align Trex 450 rotorhead.
Extra set of Align blade grips & bearings.
New Flybar & weights in package.
KBDD Flybar paddles & tail blades.
Extra set of black flybar paddles.
1 set of Align 325pro wooden blades.
1 set of Align 335pro wooden blades.
Also a almost complete set of Funcopter parts to build another rotor head.
Hyperion 3s 2200mah lipo battery
Extra new tail drive belt
Extra tail rotor shaft & gear
Extra 68mm carbon fiber tail blades
Extra 64mm tail blades
Extra tailboom with aluminum servo mounts & guides
Extra set of main gears
Extra Hitec HS-65hb servo
Asking $285 obo shipped
I believe I've cover everything. Thanks for looking!