View Single Post
Old 04-10-2014, 03:13 PM   #2
Rodneh
Member
 
Join Date: Oct 2005
Location: Florida, USA
Posts: 717
Thanked 69 Times in 68 Posts
Club: Moonport Modelers
iTrader: (0)
Friends: (0)
Default

You do not say how many cells but from the info you gave it must be a 3 cell unit. Now a LiPo should read 4.2 volts per cell or, in your case if a 3 cell, should read 12.6 volts fully charged. At 9.9 volts, the cells were dangerously near the critical low level. LiPo's are normally delivered in a partially charged state and never lower than 3.7 volts/cell. It will serve you well to do a bit of study on the care of LiPo's, lots of info here on this site. You can quickly ruin a LiPo be discharging it to low.
Rodneh is offline  
  Reply With Quote
 
Page generated in 0.10502 seconds with 17 queries