Thread: Using Motocalc
View Single Post
Old 05-10-2014, 08:50 AM   #2
CHELLIE
Super Contributor
 
CHELLIE's Avatar
 
Join Date: Oct 2006
Location: Hesperia, So. Calif
Posts: 18,215
View CHELLIE's Gallery13
Thanked 2,109 Times in 2,019 Posts
Club: Chino Renegades RC Flying Club
Awards Showcase

Scratchbuilders Award  Scratchbuilders Award  Ambassador Award  100mph Speed Demon 
iTrader: (4)
Friends: (305)
Default

Hi How many lipo cells are you using, that 2830-11 can use 2 to 4 lipo cells, if your using a 3 cell lipo, then the 10x6 might be to big of a prop, the 10x6 IMHO should be used with a 2 cell lipo, with a 3 cell lipo, you should use about a 9x5 or 8x6 prop, and with a 4 cell lipo use a 8x4 prop, check your amp draw with a wattmeter to be on the safe side.

http://www.rctimer.com/product_121.html

Model: 2830-11
Motor size: Ф28*30mm
Shaft size: Ф3.17*45mm
Weight: 52g
KV(rpm/v): 1000
Max Power: 210W
Battery: 2-4Li-Po
Prop: 10x7/8x4
Ri(M Ω): 0.127
ESC: 30A


Look at the 2830-11 prop specs at Heads up RC, they will get you very very close with your motor

http://www.headsuphobby.com/Firepowe...otor-E-630.htm

I may be getting Older, But I Refuse to grow Up I am Having to much Fun to Grow Up LOL
CHELLIE is offline  
  Reply With Quote
 
Page generated in 0.09812 seconds with 17 queries