View Single Post
Old 05-11-2014, 02:24 PM   #5
time bandit
Member
 
time bandit's Avatar
 
Join Date: Mar 2014
Location: B'ham, Alabama
Posts: 228
Thanked 4 Times in 3 Posts
iTrader: (0)
Friends: (12)
Default

Originally Posted by Stevephoon View Post
Usually 4x40 bind nuts in the motor mount with 4x40 screws. The EVA mount is really tight for this. I had to cut one side of the bind nuts to get them to fit. If you have not built the motor mount yet you maybe able to mount the bind nuts first then assemble the mount.

Steve
Thanks Steve. I didn't want to bug you again with questions, and then BOOM!! you come to the rescue!! I saw in one of your pics somewhere you had drilled the holes in your motor mount and how close they were to the edges of the mount. I figured from that pic that I was going to possibly have some trouble if I used nuts and bolts. I have already built the mount and have it screwed to the front bulkhead.

What was I thinking?
time bandit is online now  
  Reply With Quote
 
Page generated in 0.08863 seconds with 17 queries