This is driving me mad!
I'm almost finished assembling my HK 330 Extra profile but cannot figure out the settings to use 2 individual ailerons (no Y lead).
TX is the old DX7 SE (heli model) I'm plugging the right Aileron into the Aileron channel and the left aileron into Aux on the Orange RX. I've done a data reset and created a new model in the TX and I've been through both TX setups suggested here without success: http://www.spektrumrc.com/Articles/A...ArticleID=1798
I can get the ailerons working in the right directions but the left aileron automatically flicks to about 35 degrees as soon as I power up the RX.
Does anyone have any suggestions please (apart from throwing the TX in the bin!)