View Single Post
Old 06-20-2014, 06:15 AM   #3
pizzano
Behold The Renaissance
 
pizzano's Avatar
 
Join Date: May 2012
Location: So. Calif
Posts: 1,235
Thanked 82 Times in 80 Posts
Club: AMA, Marks, Pomona Valley, Prado Dam
iTrader: (0)
Friends: (3)
Default Horizon Blade Product

Horizon....I know we have an appreciation thread on them..............

This is related to a very recent event, where I posted a thread in multi-rotor....Blade 200QX:

"The manual states that once you have properly programed the TX, performed bind and are ready to take flight........after the TX is turned on and battery connected........"you must move both sticks from center to lowest bottom inside corners, then back to center" in order to get the props engaged and in an idle.....!

This had me stumped for awhile.......was only able to get the first flight off by accident, the next few attempts failed to engage props.
So I gave Horizon a call....they returned my call within a hour.....and we went through the process live.....the tech was walking me through several attempts with his 200 QX and DX6i...same as myself."

And it was resolved within 30min.......professionally, calculated and pleasant......

AMA 928214
pizzano is offline  
  Reply With Quote
 
Page generated in 0.08370 seconds with 17 queries