1/2'' foamie extra 330 aka ''chunky''

[e-fly3r]

[e-fly3r]

another pic

[e-fly3r]

sorry for the messy floor anyways this is my answer to not so stiff profiles i think it weighs around 1to1/2 #S using a 910 3 cell 400 size out runner 25 esc hovers about half or below with a 10x4.5 gonna get a 10x6 or 7 prop should help it a little .im gonna build a lighter version 2 soon . let me know what you think .

[hankg]

e-fly3r,

Nice looking plane. Have you ever calculated the wing loading on that little hummer? Do you have any carbon in the wing?

Regards,

hankg

[dsmmike]

that hook in the celing is a good idea!!! I need ways of hanging my planes on the wall or celing in my small apartment especailly because my rabbit likes to chew on things she shouldnt. Plane looks good though. I have a fancy foam su-29 with a eflite park400 910kv outrunner with a 1320mah 3s thunder tiger lipo and she weighs about 13.2oz i use an apc slowflyer prop 10x 4.7 and its a rockets at 1/3 throttle and fly great what are the specs on your motor you dont want to over prop it i get 15min flights on a pack and it just barely losing full verticle when i stop.

[e-fly3r]

the motor is a 950 kv it can handle up to a 11x7 as for the hooks they came with the [place nice huh? i dont know how to calculate wing loading but i know it dont have much it dosent float at all right now it is in a tree nesting for now. stupid plane hehehe once i get it out im trashing it because it just to heavy for my equipment i might try to make a lighter version with out the x brace . thanks for the comments

[hankg]

e-fly3r,

I know about trees bro. I put on in a tree in July. I about died of heat exhaustion before I got it out. Looking forward to seeing "chunky II".

Regards,

hankg