Cellpro Connector Wiring

[partzee]

On the Revolectrix website under downloads/Pin lead connection diagram on a 4 cell pack it shows Pin #4 is cell 2,3 pos+/cell 3 neg-.
Is this correct?
Many thanks,Partzee

[Tim Marks]

Originally Posted by partzee

On the Revolectrix website under downloads/Pin lead connection diagram on a 4 cell pack it shows Pin #4 is cell 2,3 pos+/cell 3 neg-.
Is this correct?
Many thanks,Partzee

Hi:

Do you mean this document?

http://revolectrix.com/support_docs/item_1315.pdf

Because I read the connection for pin #4 as "cell 3 pos +, cell 4 neg -", which is correct. The actual connection is made "inside of the pack" to series wire the positive of cell 3 to the negative of cell 4. You only require one wire to be connected to this "bridge" in the pack.

Hope that clears it up for you.

Tim Marks

[partzee]

Originally Posted by Tim Marks

Hi:

Do you mean this document?

http://revolectrix.com/support_docs/item_1315.pdf

Because I read the connection for pin #4 as "cell 3 pos +, cell 4 neg -", which is correct. The actual connection is made "inside of the pack" to series wire the positive of cell 3 to the negative of cell 4. You only require one wire to be connected to this "bridge" in the pack.

Hope that clears it up for you.

Tim Marks

No it's this one http://revolectrix.com/support_docs/item_1265.pdf
Thanks,Partzee

[Tim Marks]

Originally Posted by partzee

No it's this one http://revolectrix.com/support_docs/item_1265.pdf
Thanks,Partzee

Hi:

I see why you would be confused. That's an old version of the document and that is a typo. Check the link I gave you. Can you please tell me exactly how you came by that document? The correct version is available by:

1) Go to the www.revolectrix.com website
2) At the bottom, click "Downloads and Manuals" link
3) Scroll down to the Tech Docs section, and click on the document link titled "Cellpro Batteries Wiring"

I'd like to know how you navigated to the old version so I can rectify the problem.

Otherwise, is your confusion resolved now?

Thanks!

Tim Marks

[partzee]

Thanks Tim,
Here is how I got to the info:
From main pg click on adapters,left side click on adapter click on CP-GP/KO adapter pic,bottom of pg click on Downloads and Manuals,left side of pg open Cellpro Batteries Wiring.
That should do it.Hope that helps.
Partzee

[Tim Marks]

Originally Posted by partzee

Thanks Tim,
Here is how I got to the info:
From main pg click on adapters,left side click on adapter click on CP-GP/KO adapter pic,bottom of pg click on Downloads and Manuals,left side of pg open Cellpro Batteries Wiring.
That should do it.Hope that helps.
Partzee

Hi:

O.K. Thanks for the info. That's perfect! When I do this now, it pulls up a lost link which takes you to the home page. Still a problem. I'll fix it to point to the new file right away.

Thanks a lot for your input!

Tim Marks

[partzee]

Originally Posted by Tim Marks

Hi:

O.K. Thanks for the info. That's perfect! When I do this now, it pulls up a lost link which takes you to the home page. Still a problem. I'll fix it to point to the new file right away.

Thanks a lot for your input!

Tim Marks

You're most welcome Tim.
Could I ask you to take a look at my question posted this AM about wiring an adapter for my Multi 4. http://www.Wattflyer.com/forums/showthread.php?t=64889&goto=newpost

Please let me know your thoughts.
Thanks,Partzee

[Tim Marks]

Originally Posted by partzee

You're most welcome Tim.
Could I ask you to take a look at my question posted this AM about wiring an adapter for my Multi 4. http://www.Wattflyer.com/forums/showthread.php?t=64889&goto=newpost

Please let me know your thoughts.
Thanks,Partzee

Hi:

Funny, I just now hit "Post Quick Reply" to your other thread already. Please check it!

Tim Marks