Wattflyer RC Network: RC Universe :: RCU Magazine :: RCU Forums :: RCU Classifieds :: RCU User Reviews :: RCU YouTube
Home Who's Online Calendar Today's Posts RealTime Post Spy Mark Forums Read
Go Back   WattFlyer RC Electric Flight Forums - Discuss radio control eflight > Electric R/C Airplanes > Scratch and Kit Built Aircraft
Register Members List Wattflyer Extras Articles Search Today's Posts Mark Forums Read Social Groups

Scratch and Kit Built Aircraft Discuss and share your scratch built or kit built aircraft as well as building techniques, methods, mediums and resources.

Thank you for your support (hide ads)
Reply
 
Thread Tools Display Modes
Old 09-21-2012, 03:57 AM   #1
The_village_idiot
'every village needs 1
 
Join Date: Jan 2012
Location: Ohio, USA
Posts: 36
Thanked 9 Times in 8 Posts
iTrader: (0)
Friends: (0)
Default Bernard HV40 - Schneider Trophy racing seaplane scratch build

Hello all,
Time for another scratch build. I can't seem to get away from the Golden Era of aviation and most of the Schneider Trophy planes seem really cool to me. As I was surfing this site: http://doz.jp/sr/h_ozawa_works_2009.html
I came across the beautiful aviation artwork of Mr. Ozawa in Japan. The Bernard HV40 caught my eye with its oddball faired radial, and I knew I had to try and build one. It was really hard to find much information about the plane, so I contacted Mr. Ozawa and he graciously provided a 3-view and some other reference information he had found about the plane.
I have been slowly working on it for a few months now but our computer decided to go on sabbatical for a while. So now that the computer is back up and running, I have a backlog of photos to share.
I wanted to keep it parkflyer-ish, so the wing-span is about 40. The airfoil is a Clark Y, mostly because they are easy to build, and float well enough for my limited pilot skills to keep up. Other than that, most specs are still up in the air (pun), based on the weight. I am targeting somewhere in the low 20oz. range (I hope). I decided that I am going to full sheet/plank this one, so I am a little worried about how the weight is going to work out.
Here is the picture progress so far.


Attached Thumbnails
Click image for larger version

Name:	Bernard HV40 side view.JPG
Views:	342
Size:	29.0 KB
ID:	162729   Click image for larger version

Name:	IMG_8730.jpg
Views:	354
Size:	63.0 KB
ID:	162730   Click image for larger version

Name:	IMG_8781.jpg
Views:	283
Size:	91.3 KB
ID:	162731   Click image for larger version

Name:	IMG_8794.jpg
Views:	270
Size:	100.1 KB
ID:	162732   Click image for larger version

Name:	IMG_8796.jpg
Views:	251
Size:	79.6 KB
ID:	162733  

Click image for larger version

Name:	IMG_8805.jpg
Views:	230
Size:	81.4 KB
ID:	162734   Click image for larger version

Name:	IMG_8836.jpg
Views:	203
Size:	113.1 KB
ID:	162735   Click image for larger version

Name:	IMG_8838.jpg
Views:	191
Size:	88.2 KB
ID:	162736  
The_village_idiot is offline  
  Reply With Quote
Old 09-21-2012, 05:40 AM   #2
mclarkson
Super Contributor
 
mclarkson's Avatar
 
Join Date: May 2010
Location: Wichita, KS
Posts: 3,027
View mclarkson's Gallery4
Thanked 182 Times in 180 Posts
Awards Showcase

AV Contest  Scratchbuilders Award  Outstanding Contributor Award 
iTrader: (0)
Friends: (7)
Default

Best of luck. That's a beautiful plane. I love sports planes from that era.

mclarkson is offline  
  Reply With Quote
Old 09-21-2012, 03:41 PM   #3
Bill G
Super Contrubutor
 
Bill G's Avatar
 
Join Date: Oct 2005
Location: West Central PA
Posts: 4,336
View Bill G's Gallery88
Thanked 178 Times in 172 Posts
Club: rcg staff
Awards Showcase

Outstanding Contributor Award  Outstanding Contributor Award  Scratchbuilders Award 
iTrader: (3)
Friends: (17)
Default

Beautiful subject with beautiful lines.
Roy Tassell had finished a beautiful model of a similar Bernard HV220 seaplane, started by a friend who had passed away. Sadly Roy has passed away this past year, and was an excellent seaplane modeler. I was fortunate to meet him on SeawingsUK a few years ago.
http://theflyingboatforum.forumlaunc...php?f=87&t=828
Bill G is offline  
  Reply With Quote
Old 11-20-2012, 03:36 AM   #4
The_village_idiot
'every village needs 1
 
Join Date: Jan 2012
Location: Ohio, USA
Posts: 36
Thanked 9 Times in 8 Posts
iTrader: (0)
Friends: (0)
Default Progress update

So its been a while. Here is the latest progress.
Basically, most of the parts have been framed out. I still need to work on the nose of the fuse and the motor mounting. Everything was looking to be pretty light until I started sheeting. The floats doubled (!) in weight from about 30g per side to 60g per side (1/32" sheeting). This is without glassing yet. I had really hoped to sheet/glass the rest of the plane but this weight increase has got me worried. I am planning on using 1/2 oz glass cloth but I still see the weight going way up. I am going to try glassing the floats first (basically because I have to in order to seal them up for bouyancy anyway) and see where they end up. This thing may just sink to the bottom of the lake!


Attached Thumbnails
Click image for larger version

Name:	IMG_8873.jpg
Views:	130
Size:	99.7 KB
ID:	164297   Click image for larger version

Name:	IMG_8892.jpg
Views:	125
Size:	119.7 KB
ID:	164298   Click image for larger version

Name:	IMG_8917.jpg
Views:	115
Size:	111.2 KB
ID:	164299   Click image for larger version

Name:	IMG_8918.jpg
Views:	105
Size:	106.0 KB
ID:	164300   Click image for larger version

Name:	IMG_9067.jpg
Views:	113
Size:	85.3 KB
ID:	164301  

Click image for larger version

Name:	IMG_9215.jpg
Views:	122
Size:	137.5 KB
ID:	164302   Click image for larger version

Name:	IMG_9368.jpg
Views:	195
Size:	130.8 KB
ID:	164303   Click image for larger version

Name:	IMG_9372.jpg
Views:	200
Size:	113.9 KB
ID:	164304  
The_village_idiot is offline  
  Reply With Quote
Old 11-20-2012, 03:58 AM   #5
mclarkson
Super Contributor
 
mclarkson's Avatar
 
Join Date: May 2010
Location: Wichita, KS
Posts: 3,027
View mclarkson's Gallery4
Thanked 182 Times in 180 Posts
Awards Showcase

AV Contest  Scratchbuilders Award  Outstanding Contributor Award 
iTrader: (0)
Friends: (7)
Default

Originally Posted by The_village_idiot View Post
I couldn't resist mocking everything into place just to see what it will look like. Sat in my chair and when "Vrooom" for a minute.
I do that constantly with every build. Looking good there.

mclarkson is offline  
  Reply With Quote
Old 11-20-2012, 04:24 AM   #6
CHELLIE
Super Contributor
 
CHELLIE's Avatar
 
Join Date: Oct 2006
Location: Hesperia, So. Calif
Posts: 18,732
View CHELLIE's Gallery13
Thanked 2,190 Times in 2,096 Posts
Club: Chino Renegades RC Flying Club
Awards Showcase

Scratchbuilders Award  Scratchbuilders Award  Ambassador Award  100mph Speed Demon 
iTrader: (4)
Friends: (317)
Default

Very Nice Build, Subscribed

I may be getting Older, But I Refuse to grow Up I am Having to much Fun to Grow Up LOL
CHELLIE is offline  
  Reply With Quote
Old 11-20-2012, 12:23 PM   #7
pd1
Still Learning
 
pd1's Avatar
 
Join Date: Sep 2006
Location: North of Boston
Posts: 4,021
View pd1's Gallery69
Thanked 578 Times in 540 Posts
Club: Cape Ann RC Model Club
Awards Showcase

Globetrotter Pilot  WAA-08 Pilot  Outstanding Contributor Award 
iTrader: (6)
Friends: (53)
Default

Nice airplane subject, nice job building.
Looking forward to more pictures.

Paul
pd1 is offline  
  Reply With Quote
Old 12-16-2012, 10:21 AM   #8
Allroaddm
New Member
 
Join Date: Dec 2012
Location: Bavaria - Germany
Posts: 1
Thanked 0 Times in 0 Posts
iTrader: (0)
Friends: (0)
Default

When i finished my Macchi M39 Project this will be my next Seaplane Racer ! Great Job !

Greetings from Bavaria

Dirk
Allroaddm is offline  
  Reply With Quote
Old 12-17-2012, 04:20 PM   #9
soarrich
Soarrich
 
soarrich's Avatar
 
Join Date: May 2012
Location: NJ, USA
Posts: 161
Thanked 9 Times in 8 Posts
Club: JCSF & MMAC
iTrader: (0)
Friends: (0)
Default

Wow! That's really looking good.
soarrich is offline  
  Reply With Quote
Old 12-22-2012, 08:46 PM   #10
The_village_idiot
'every village needs 1
 
Join Date: Jan 2012
Location: Ohio, USA
Posts: 36
Thanked 9 Times in 8 Posts
iTrader: (0)
Friends: (0)
Default Float update

Slowly working on completing the floats. They are almost like building 2 additional airplanes!
Here's the story on weight for 1 float:
Float in the "bones": 31grams (see pics)
Float sheeted: 61grams
Fiberglassed w/ 0.5oz fabric: 87 grams
Primed/filled: ??

Based on these numbers, I need to figure out what I am going to do for the rest of the plan regarding covering - Should I sheet/glass or use covering?

This is my first experience with fiberglassing and I have to say it is going better than I expected. There is still lots of sanding/filling/priming to do but the finish is much better than I imagined.


Attached Thumbnails
Click image for larger version

Name:	IMG_9220.jpg
Views:	115
Size:	123.0 KB
ID:	164987   Click image for larger version

Name:	IMG_9429.jpg
Views:	135
Size:	116.0 KB
ID:	164988   Click image for larger version

Name:	IMG_9431.jpg
Views:	125
Size:	111.6 KB
ID:	164989   Click image for larger version

Name:	IMG_9434.jpg
Views:	124
Size:	97.3 KB
ID:	164990   Click image for larger version

Name:	IMG_9435.jpg
Views:	120
Size:	122.1 KB
ID:	164991  

Click image for larger version

Name:	IMG_9437.jpg
Views:	117
Size:	124.3 KB
ID:	164992   Click image for larger version

Name:	IMG_9464.jpg
Views:	129
Size:	116.0 KB
ID:	164993   Click image for larger version

Name:	IMG_9466.jpg
Views:	145
Size:	135.9 KB
ID:	164994  
The_village_idiot is offline  
  Reply With Quote
Old 12-22-2012, 08:47 PM   #11
The_village_idiot
'every village needs 1
 
Join Date: Jan 2012
Location: Ohio, USA
Posts: 36
Thanked 9 Times in 8 Posts
iTrader: (0)
Friends: (0)
Default

Oops - the fiberglassed weight is 67grams, not 61...
The_village_idiot is offline  
  Reply With Quote
Old 12-22-2012, 08:49 PM   #12
The_village_idiot
'every village needs 1
 
Join Date: Jan 2012
Location: Ohio, USA
Posts: 36
Thanked 9 Times in 8 Posts
iTrader: (0)
Friends: (0)
Default

Living up to my login name... that should say " the sheeted weight is 67 grams, not 61..." Man, I need to take a break. Sorry.
The_village_idiot is offline  
  Reply With Quote
Old 12-22-2012, 09:01 PM   #13
baz49exe
Super Contributor
 
baz49exe's Avatar
 
Join Date: Jun 2008
Location: Devon. England
Posts: 1,101
View baz49exe's Gallery15
Thanked 135 Times in 130 Posts
Club: East Devon Radio Control Club
Awards Showcase

Outstanding Contributor Award  Scratchbuilders Award 
iTrader: (0)
Friends: (15)
Default

Great subject and lovely workmanship! Can't wait to see the finished model. You've got to like a float plane!!!
baz49exe is offline  
  Reply With Quote
Old 01-17-2013, 04:33 AM   #14
The_village_idiot
'every village needs 1
 
Join Date: Jan 2012
Location: Ohio, USA
Posts: 36
Thanked 9 Times in 8 Posts
iTrader: (0)
Friends: (0)
Default more updates

Sorry I have been building, not blogging. Here is the latest.

I decided to go ahead and sheet/glass everything despite the weight. Looks like it will now be a hefty pig somewhere in the upper 20's ounces.
I sheeted most of the fuse, knowing that the fuse was crooked by a few millimeters along the back half. I guess I had hoped I could "pull" it back with the sheeting but, that didn't work, so... "off with its tail"! I spent some more time jigging the whole rear half to the build bench and had much better results the second time around.
With the fuse sheeted, I finally had enough parts to take a rough look where the CG would fall. My original thought was to put everything as far forward as I could get but I should have thought more about the floats, and how much weight they would put forward of the CG. (I am beginning to hate these floats...). After the first CG check, I found that was way off and I needed to move weight backwards. So...more cut and paste. The servos for the rudder and elevator have moved to the back of the belly pan, which works out better for weight and wire routing. The battery moves from right behind the firewall to the belly pan, right about at the CG. I have a few more details to work out but I think it will all finally work.
It is starting to look more and more like a real plane.


Attached Thumbnails
Click image for larger version

Name:	IMG_9598.jpg
Views:	137
Size:	93.2 KB
ID:	165620   Click image for larger version

Name:	IMG_9615.jpg
Views:	134
Size:	122.0 KB
ID:	165621   Click image for larger version

Name:	IMG_9657.jpg
Views:	130
Size:	138.3 KB
ID:	165622   Click image for larger version

Name:	IMG_9665.jpg
Views:	183
Size:	104.9 KB
ID:	165623   Click image for larger version

Name:	IMG_9668.jpg
Views:	210
Size:	111.8 KB
ID:	165624  

The_village_idiot is offline  
  Reply With Quote
Old 01-17-2013, 07:29 AM   #15
mclarkson
Super Contributor
 
mclarkson's Avatar
 
Join Date: May 2010
Location: Wichita, KS
Posts: 3,027
View mclarkson's Gallery4
Thanked 182 Times in 180 Posts
Awards Showcase

AV Contest  Scratchbuilders Award  Outstanding Contributor Award 
iTrader: (0)
Friends: (7)
Default

Looking awesome.

mclarkson is offline  
  Reply With Quote
Old 01-29-2013, 06:01 AM   #16
The_village_idiot
'every village needs 1
 
Join Date: Jan 2012
Location: Ohio, USA
Posts: 36
Thanked 9 Times in 8 Posts
iTrader: (0)
Friends: (0)
Default

Making slow progress...

Worked on the float struts and fairings. I decided to invest in making a set of jigs out of blue foam in order to keep the fuse and floats aligned while bending up the wire for the struts. It only took a little bit of time and probably saved me time in the long run. It was really easy to bend, check, bend again, etc... and keep everything straight.
The struts are a wire frame (I forget the wire diameter) with foam to make the shape. Once out of the jig, I found the floats are a little heavy for the wire, and they tend to sag in-board under the weight. That changes my strategy for the float bracing wires. I orignally planned on having them for aesthetics only but I think they will need to be structural to keep things solid. Looks like I have some "open float" surgery in my future...


Attached Thumbnails
Click image for larger version

Name:	IMG_0007_resize.jpg
Views:	121
Size:	399.5 KB
ID:	165958   Click image for larger version

Name:	IMG_0008_resize.jpg
Views:	155
Size:	452.3 KB
ID:	165959   Click image for larger version

Name:	IMG_0012_resize.jpg
Views:	138
Size:	326.7 KB
ID:	165960   Click image for larger version

Name:	IMG_0013_resize.jpg
Views:	155
Size:	442.7 KB
ID:	165961  
The_village_idiot is offline  
  Reply With Quote
Old 01-29-2013, 02:59 PM   #17
pmullen503
Member
 
Join Date: Mar 2011
Posts: 875
Thanked 75 Times in 74 Posts
Awards Showcase

Scratchbuilders Award 
iTrader: (0)
Friends: (3)
Default

So cool!

It's never too late to have a happy childhood.
pmullen503 is offline  
  Reply With Quote
Old 01-29-2013, 06:01 PM   #18
xmech2k
Ya got any Beeman's?
 
xmech2k's Avatar
 
Join Date: Apr 2009
Location: San Diego, CA
Posts: 2,790
View xmech2k's Gallery21
Thanked 265 Times in 263 Posts
Club: CVMRCC, SEFSD
Awards Showcase

Scratchbuilders Award  1kW  Outstanding Contributor Award 
iTrader: (0)
Friends: (8)
Default

Wow! How did I miss this build up till now? Beautiful subject and work, and once again, I'm envious of another's talent. (And patience!)
xmech2k is online now  
  Reply With Quote
Old 02-16-2013, 03:21 AM   #19
The_village_idiot
'every village needs 1
 
Join Date: Jan 2012
Location: Ohio, USA
Posts: 36
Thanked 9 Times in 8 Posts
iTrader: (0)
Friends: (0)
Default Float surgery complete

As I mentioned in my last post, I needed to do some surgery on the floats in order to add some strength to make the float wires structural. After some hacking, I got all the wires (0.080 carbon rod) in and it made a huge difference in the stability/strength of the floats, even without glueing them in place.


Attached Thumbnails
Click image for larger version

Name:	IMG_0110_resize.jpg
Views:	101
Size:	389.8 KB
ID:	166289   Click image for larger version

Name:	IMG_0112_resize.jpg
Views:	106
Size:	288.7 KB
ID:	166290   Click image for larger version

Name:	IMG_0118_resize.jpg
Views:	117
Size:	389.3 KB
ID:	166291   Click image for larger version

Name:	IMG_0132_resize.jpg
Views:	140
Size:	274.7 KB
ID:	166292   Click image for larger version

Name:	IMG_0136_resize.jpg
Views:	159
Size:	296.4 KB
ID:	166293  

The_village_idiot is offline  
  Reply With Quote
Old 02-16-2013, 04:57 PM   #20
tobydogs
love to build!
 
tobydogs's Avatar
 
Join Date: Jan 2010
Location: nj usa
Posts: 3,035
Thanked 202 Times in 199 Posts
Club: rcrcc rockland county,ny
Awards Showcase

Outstanding Contributor Award 
iTrader: (0)
Friends: (17)
Default

she's a beauty for sure!!! your doing a great job to the whole project and i'm shocked i never posted before this to thankyou for sharing this build with us. i'v been following along but now i'm subscribed.

i really like the round fuse,all the kits i build are flat sided for the most part and i want to p/u a rounded bipe fuse build in the future.....seems building is taking a back seat to lazyness. thats the drawback of having a job i love and giving it my all during the week.

i like the 1/4 scale newport from balsa usa...


narrow is the place to land...wide is the space to crash....choose the narrow way!
tobydogs is online now  
  Reply With Quote
Old 03-08-2013, 03:28 AM   #21
The_village_idiot
'every village needs 1
 
Join Date: Jan 2012
Location: Ohio, USA
Posts: 36
Thanked 9 Times in 8 Posts
iTrader: (0)
Friends: (0)
Default

Here's the latest. Basically I have been doing a lot of fiberglassing, sanding, filling, sanding, priming, sanding, sanding, sanding.... I really don't know how guys can stand doing a 1/4 scale with fiberglass. I am glad I stuck with a ~40" span! Most of the major parts are now glassed and sanded but there is still so much to do.


Attached Thumbnails
Click image for larger version

Name:	IMG_0175_resize.jpg
Views:	85
Size:	364.5 KB
ID:	166928   Click image for larger version

Name:	IMG_0244_resize.jpg
Views:	93
Size:	362.4 KB
ID:	166929   Click image for larger version

Name:	IMG_0367_resize.jpg
Views:	119
Size:	383.3 KB
ID:	166930   Click image for larger version

Name:	IMG_0385_resize.jpg
Views:	157
Size:	267.1 KB
ID:	166931  
The_village_idiot is offline  
  Reply With Quote
Old 03-08-2013, 03:43 AM   #22
pmullen503
Member
 
Join Date: Mar 2011
Posts: 875
Thanked 75 Times in 74 Posts
Awards Showcase

Scratchbuilders Award 
iTrader: (0)
Friends: (3)
Default

Looking good so far. The fairings are the defining feature of the plane, I don't envy you the work and skill it will take to get them just right. Are you going to pre-finish them before you glue them on?

It's never too late to have a happy childhood.
pmullen503 is offline  
  Reply With Quote
Old 03-13-2013, 02:53 AM   #23
The_village_idiot
'every village needs 1
 
Join Date: Jan 2012
Location: Ohio, USA
Posts: 36
Thanked 9 Times in 8 Posts
iTrader: (0)
Friends: (0)
Default

pmullen - you're right. The plan is to pre-finish the fairings and then glue them on. It would be really difficult to glue them on and then glass/sand/fill them. I am currently part way through glassing all the fairings. After that, I will hollow them out to save weight. I hope that I can glue them in place and only use a small fillet of microballons / epoxy where they meet the fuse. Everything will get a final sand/fill once it is all glued in place, in preparation for final paint.
I also need to integrate the fairings with the motor cooling somehow. The original plane had small holes in the fairings to provide some cooling to the radial engine. I am going to try and use these holes to help cool the motor.
The_village_idiot is offline  
  Reply With Quote
Old 03-13-2013, 04:24 AM   #24
pmullen503
Member
 
Join Date: Mar 2011
Posts: 875
Thanked 75 Times in 74 Posts
Awards Showcase

Scratchbuilders Award 
iTrader: (0)
Friends: (3)
Default

Perhaps this is a little late but it may help you do the cylinder heads. See this post on making cheap silicone casts using silicone caulk and cornstarch as a catalyst. Below is a dummy radial I made from a 1/12 scale Williams Brothers kit. I bought a single cylinder and crankcase kit and used them to make the molds, then cast the crankcase and 9 cylinders with epoxy. The detail was very good. If the foam fairings aren't up to snuff, you could also do the fairings this way too.




It's never too late to have a happy childhood.
pmullen503 is offline  
  Reply With Quote
Old 05-20-2013, 04:42 AM   #25
The_village_idiot
'every village needs 1
 
Join Date: Jan 2012
Location: Ohio, USA
Posts: 36
Thanked 9 Times in 8 Posts
iTrader: (0)
Friends: (0)
Default What has that idiot been up to?

Been a while. The plane has been sitting on the bench, with not much happening to it. I have been working on all the details for the fairings, etc. so it looks like really slow progress.
I permanently mounted the wing to the fuse and faired the wing into the fuse with blue foam.
In the last update, I had made all the engine fairings by blue foam. After fitting some of them I realized that the shape was right, and modifying the blue foam was really going to be a pain. I had some mild success with heat stretching a canopy/windshield, so I invested some time and went the vacuum forming route for the fairings. Getting the vacuum forming pattern right took me 4 and 1/2 tries but I finally was happy with it. I started cranking them out and I am now glad that I went the vacuum forming route. I am now in the process of trimming them to fit each location.
In parallel with that, I was inspired by pmullen's suggestion and started working on some ideas for the cylinder heads, but more on that later.


Attached Thumbnails
Click image for larger version

Name:	068_resize.jpg
Views:	77
Size:	221.1 KB
ID:	168921   Click image for larger version

Name:	071_resize.jpg
Views:	88
Size:	268.7 KB
ID:	168922   Click image for larger version

Name:	025_resize.jpg
Views:	91
Size:	238.4 KB
ID:	168923   Click image for larger version

Name:	IMG_0763_resize.jpg
Views:	83
Size:	312.2 KB
ID:	168924   Click image for larger version

Name:	IMG_0690_resize.jpg
Views:	87
Size:	253.5 KB
ID:	168925  

Click image for larger version

Name:	IMG_0768_resize.jpg
Views:	98
Size:	351.8 KB
ID:	168926   Click image for larger version

Name:	026_resize.jpg
Views:	108
Size:	353.8 KB
ID:	168927  
The_village_idiot is offline  
  Reply With Quote
Reply

  WattFlyer RC Electric Flight Forums - Discuss radio control eflight > Electric R/C Airplanes > Scratch and Kit Built Aircraft

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
$100 Scratch Build Contest "Best Looking" poll here hillbillynamedpossum Scratch and Kit Built Aircraft 107 08-27-2013 12:23 AM
EPP F-22 Scratch build, first pusher jet. Timewarp Scratch and Kit Built Aircraft 5 02-11-2012 10:15 PM
First scratch build Aaeolien Scratch and Kit Built Aircraft 13 08-28-2011 04:30 AM
$100 Scratch Build Contest Best Build Thread hillbillynamedpossum Scratch and Kit Built Aircraft 2 05-17-2011 03:43 AM
$100.00 Scratch Build Contest: 60" Glider Propjobbill Scratch and Kit Built Aircraft 19 05-11-2011 05:08 AM


All times are GMT +1. The time now is 01:30 AM.


Powered by: vBulletin
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 2005 WattfFlyer.com
RCU Eflight HQ

Charities we support Select: Yorkie Rescue  ::  Crohn's & Colitis Foundation



Page generated in 2.83231 seconds with 120 queries